1. Charge the electric wine corkscrew before use (the charging time is 8 to 10 hours). Use a paper cutter to remove foil from wine bottles before using an electric wine corkscrew. 2. Firmly hold the wine bottle with one hand, hold the main body of the bottle opener with the other hand, put the lower end of the main body of the bottle opener on the mouth of the red wine bottle, and try to keep the main body of the bottle opener and the mouth of the bottle as straight as possible. 3. Press and hold the "open bottle" button at the bottom of the electric wine corkscrew, and at the same time press down the main body of the corkscrew slightly. At this time, the auger will rotate clockwise and screw into the cork, about 6-8 seconds, the corkscrew will automatically open. Pull out the wine cork. When the wine cork is completely pulled out, the corkscrew will automatically stop working. At this time, you can release the corkscrew button and remove the corkscrew from the wine bottle. 4. Firmly hold the electric wine corkscrew, press and hold the "Remove Cork" button above, the auger rotates counterclockwise, after about 5 to 7 seconds, the red wine cork will automatically withdraw from the corkscrew, release the button , the whole process is over, you can enjoy red wine happily. 5. This bottle opener can open standard red (white) wine bottles or other cork stoppers. After each use of the electric wine corkscrew, please put it back on the base, which can effectively protect the corkscrew. After reading the above introduction on how to use the electric wine corkscrew to use the electric corkscrew, just put the lower end of the corkscrew around the bottle mouth, start the switch electric drill, and drill down until the stopper is released from the bottle mouth. Then press and hold the other end of the switch, the electric drill will automatically push out the reverse drill, and the cork will fall off.